YCP handles the full line of PoweRam Products. Pipe Pushers. Pipe Pullers. Hydraulic powered Units of various capacities used to install and toalso burst existing Pipe. Let YCP assist you with the sizing of the unit to perform your own trench Pipe pulling/pushing/bursting needs. We appreciate the opportunity to assist you with these products. We can also assist if you need custom Hydraulically power Plants.
We also carry the RGC Hydraulic Construction Tool Line. Hydraulic Concrete Chainsaws, Circular Saws, Submersible Pumps, Breakers, Rock Drills & More.
Larger Hydraulic Power Units from PoweRam - Sold By YCP
{These Units are used with PoweRams Pipe Push/Puller Units but can also be used as Independent Power Sources for Hydraulic Tools. Modifications can be made to these Units to adapt to various needs and usage }
The Model 4000 Hydraulic Power Unit is powered by a 44 HP Yanmar Diesel engine (sold and serviced worldwide by John Deere). This is a very smooth running four cylinder liquid-cooled engine designed for industrial duty.
Engine features include tachometer, hour meter, and automatic low oil shutdown.
A variable volume pump with load sense control provides 30 g.p.m. to 1800 p.s.i.; decreasing to 18 g.p.m. at 3000 p.s.i.. This allows the unit to deliver the largest volume (i.e. the most speed) over a wide pressure range.
The Model 4000 has an extra large hydraulic oil reservoir (43 gallons), with fill screen, level and temperature gauges, magnetic suction screen, and high performance return line filter with change indicator gauge. A hydraulic oil cooler protects against heat build-up.
The 19 gallon capacity fuel tank provides up to 9 hours of continuous operation at full pump speed.
All the gauges and controls, including the hydraulic system pressure gauge and battery, are visible and accessible from the operator’s side of the unit. The hood hinges up to access the fuel, radiator, engine oil, and hydraulic oil fill caps.
A built in hose rack holds up to 50 feet of supply (pressure) and return hose. A 25 foot set of hoses with flush face connectors is supplied as a standard item, but we can furnish whatever you need.
The sturdy skid frame protects the unit and allows it to be handled by fork lift or overhead crane. The full length hood provides weather protection, and a grill shields the radiator and oil cooler.
The Model 4000 Hydraulic Power Unit is 33" wide x 76" long x 44" high and weighs 1400 lbs..
This unit can be set up as a trailer if a towable unit would fit your needs best. We can also fit it with directional control valves, split circuits, pressure or flow regulators, hose reels, etc.
We also build custom designed hydraulic power units if one of our standard models does not fit your application.
A Kohler Command 25 HP gasoline engine powers the Model 2613 Hydraulic Power Unit. This is a high performance V-Twin engine with overhead valves, hydraulic valve lifters, electronic ignition, a self-relieving choke/carburetor, oil cooler, duel element air cleaner, and many other advanced features. The Command 25 has a 12 volt solenoid-shift starter and a 15 amp charging system.
A variable volume piston pump with pressure compensated horsepower limiter control delivers 24 gpm at pressures up to 1400 psi. As the pressure rises from 1400 psi to 3000 psi, the flow drops to 11 gpm. This pump and control combination gets the maximum amount of work out of the engine and delivers speed when speed is needed and power when power is required.
Poweram adds many features to this combination including fuel filter, hour meter, and hydraulic oil cooler with by-pass relief. A magnetic suction filter and an internal relief valve protect the pump. The entire hydraulic system is protected by an external safety relief valve and a high efficiency return line filter.
The 20 gallon hydraulic oil tank has a screened fill cap, oil level /temperature gauge, and a removable top.
3/4" hydraulic hoses with flat face quick couplers are included. They are stored on a built-in hose rack for easy access. 25 feet is the standard length, other lengths may be ordered.
An auxiliary hydraulic circuit (or circuits) can be provided. Features such as priority flow dividers or pressure regulation can also be added.
The Model 2613's sturdy, compact skid frame provides protection from all sides and allows the unit to be lifted by overhead crane or forklift.
The unit is 29" wide x 52" long x 33" high and weights 740 lbs. with 20 gallons of hydraulic oil and 6 gallons of gasoline.
An 18 HP Kohler Magnum gasoline engine powers this newly redesigned unit. A variable volume piston pump with pressure compensated control delivers up to 17 gpm at low pressures. The maximum pressure is 3000 psi.
Standard features include electric start, fuel filter, hour meter, and hydraulic oil cooler with by-pass relief. A magnetic suction filter and an internal relief valve protect the pump. The system is protected by an external safety relief valve and a high efficiency return line filter.
The 18 gallon hydraulic oil tank has a screened fill cap, oil level /temperature gauge, and a removable top.
3/4" hydraulic hoses with flat face quick couplers are included. They are stored on a built-in hose rack for easy access. 25 feet is the standard length, other lengths may be ordered.
The Model 2010's sturdy, compact skid frame provides protection from all sides and allows the unit to be lifted by overhead crane or forklift. The hinged cover shields the unit from the weather and allows easy access to the fuel and oil tank or for routine engine maintenance. The cover may be locked for security.
The unit is 28" wide x 46" long x 32" high and weights 600 lbs. with 18 gallons of hydraulic oil and 6 gallons of gasoline.
The Model 2010 was designed as a companion for our Mini-Ram rod pushers, but it can do other jobs as well. An auxiliary hydraulic circuit (or circuits) can be provided to power water pumps and other tools. Features such as priority flow dividers or pressure regulation can also be added.
Power Units from RGC - Sold By YCP {These Units are used with RGC's Breakers, Pumps, Saws, Core Drills. Impact Wrenchs, Submersible Pumps but can also be used as Independent Power Sources for Hydraulic Tools. }
RGC Gas Powered Hydraulic Power Unit
RGC Electric Hydraulic Power Plant
Power Units from Rice Hydro - Sold By YCP {Rice makes 2 Hydraulic Power Units .. The HPU is a Standard Unit that can be used for various Applications and running of Hydraulically powered Equipment. The Rice Shoring Pump allows Multipal Shoring units to be Powered at the same time, allowing equal expansion saving time and money on long shoring runs. }
RICE HPU Basic Hydraulic Power Unit
RICE Hydraulic Shoring Pump
YCP, a different kind of Sales Company. We give you our best price the 1st time. We also pass on freight & Bulk Purchasing Discounts if available.
Banks charge to Process Credit Cards. ( We give our Customers an additional [3%] discount when they pay with a Wire Transfer ) Discover the YCP Difference
MORE PRODUCTS FROM YCP - COME VISIT US www.ycpcorp.com , See what YCP has to help you get the Job Done ..... Below is a Partial Line Sheet. We can be reached at 888-591-4991 or leave us a message and we will promptly return your call.
* CONCRETE VIBRATORS Electric 1.5 & 2.5 HP Gas Powered Pneumatic Concrete vibrators Concrete Vibrator Specialty Heads
* DIAMOND BLADES & CORE BITS Asphalt Diamond Blades Brick & Block Diamond Blades Concrete Diamond Blades Core Drill Attachments Core Drill Stands Diamond Core Bits Diamond Cup Wheels Dual Purpose Diamond Blades Ductile Iron Diamond Blades Fire & Rescue Diamond Blades Hand Held Concrete Saws Hand Held Core Drills Pro Series - Diamond Blades & Core Bits (When ONLY the Best Will Do) Specialty Diamond Blades Walk Behind Saws
* VARIOUS SPECIALITY ITEMS Hurco Power Smoker II - Liquid Smoke Testing Portable Post Hole Diggers Snow Plow Blades Titan Pipe Tugger Tow Behind Post Hole Diggers Vacuum Excavation Equipment Vacuum Tanks - Large Water Tanks - Large
